Please Help!!! Turning signal doesn't work!

I had my car jump started last night after about a week of not running it.. well everythang seemed fine for a lil while, then all of a sudden I noticed my turning single was not working..So when i got home I check the fuse inside the car and sure enough it was blown.. So i changed it this afternoon and the turning signals still doesn't work? Anyone have any ideas???

Check the bulbs too that may be your prob.

Did you check your fuse a second time? It could have a short and keep blowing each time you cut on the turn signal. Could be a flasher as well. Do your 4-ways work?

Did you check your fuse a second time? It could have a short and keep blowing each time you cut on the turn signal. Could be a flasher as well. Do your 4-ways work?

4 ways as in hazard lights?? Yes they work!.. and My bulbs work. And I did check the fuse a second, third, and fourth time. Its not blown

Well if everything else is good, then it sounds like a turn signal flasher to me. Try replacing that.

Well if everything else is good, then it sounds like a turn signal flasher to me. Try replacing that.

okay i'ma check it out.. thanks!

IF this car was ever a tow behind vehicle they would hav installed a small diod on the wire going to the light, if its there just remove it.look for it next to light.

IF this car was ever a tow behind vehicle they would hav installed a small diod on the wire going to the light, if its there just remove it.look for it next to light.
.........wtf?

I highly doubt anyone would use it for a tow-behind vehicle, and I don't see how this has anything to do with is problem, because if it WAS a tow-behind, the people towing it would still need a way to use the turn signals without taking out the "diode" everytime they drive it.