2000 Stratus with a P0441 code
videobruce
09-13-2007, 11:33 PM
Vehicle history;
LDP (Leak Detection Pump) was changed out after a P0442 error,
Then the filler neck was replaced after a P455 error (neck rusted out),
Now there is a P0441 Incorrect Purge Flow code (MIL 113).
Do I test the Purge Control Solenoid by putting my hand on it and feeling and/or listening for any clicks when it cycles? Since this code only appeared after the filler neck was replaced and the PCM cleared would disturbing the vent hose and gas tank inlet hose affect any components above the fuel tank?
Others suggested the gas cap, but I question that.
LDP (Leak Detection Pump) was changed out after a P0442 error,
Then the filler neck was replaced after a P455 error (neck rusted out),
Now there is a P0441 Incorrect Purge Flow code (MIL 113).
Do I test the Purge Control Solenoid by putting my hand on it and feeling and/or listening for any clicks when it cycles? Since this code only appeared after the filler neck was replaced and the PCM cleared would disturbing the vent hose and gas tank inlet hose affect any components above the fuel tank?
Others suggested the gas cap, but I question that.
videobruce
09-21-2007, 01:59 PM
It was reversed hoses to the Purge Solenoid.
Automotive Network, Inc., Copyright ©2026
