I messed up....glue on window..please help...
Renelsisc
09-12-2007, 04:11 PM
Hi guys,
So on the FINAL step of my project Supra, I had to glue the rear view mirror on the window. Of course, i HAD to drop the tweezer when placing it and there's a small patch of glue on the window now. It looks sorta like it's scratched/fogged up. Any way of removing this? I am such an idiot.
Thanks
So on the FINAL step of my project Supra, I had to glue the rear view mirror on the window. Of course, i HAD to drop the tweezer when placing it and there's a small patch of glue on the window now. It looks sorta like it's scratched/fogged up. Any way of removing this? I am such an idiot.
Thanks
klutz_100
09-12-2007, 04:36 PM
What kind of glue where you using?
MPWR
09-12-2007, 05:58 PM
...and why (oh why) don't people include this kind of info in their initial question???? :eek7: :shakehead
rallymaster
09-12-2007, 06:15 PM
Hello,
I was the glue-accident specialist on my first models ! :rofl:
So here is what I do when I have some glue-haze or worse a drop of glue falling on the window.
First thing, I let it dry several hours (not to spread it more when trying something)
Secondly, I sand the drop of glue (but not with rough sandpaper, be carefull not to sand to much) and sometimes scrape it with a tooth-stick before sanding.
And to find back the translucide, I use compound... again and again till getting a satisfying result.
You can also try to "wash" the window with isopropyl alcohol, that doesn't hurt translucide plastic, but you'll need to use compound anyway I guess...
Hope it can help. :wink:
I was the glue-accident specialist on my first models ! :rofl:
So here is what I do when I have some glue-haze or worse a drop of glue falling on the window.
First thing, I let it dry several hours (not to spread it more when trying something)
Secondly, I sand the drop of glue (but not with rough sandpaper, be carefull not to sand to much) and sometimes scrape it with a tooth-stick before sanding.
And to find back the translucide, I use compound... again and again till getting a satisfying result.
You can also try to "wash" the window with isopropyl alcohol, that doesn't hurt translucide plastic, but you'll need to use compound anyway I guess...
Hope it can help. :wink:
Renelsisc
09-12-2007, 10:20 PM
i am so sorry, forget to mention glue type...i'm a newb...anyway, i was using drips of Testors clear cement thingy and just dip a SMALL portion using a toothpick...thanks
klutz_100
09-12-2007, 11:16 PM
As Phil says, sand down and then polish back up to clear.
You will find useful information here: cleaning and replacing clear parts (http://www.automotiveforums.com/vbulletin/showthread.php?t=514642)
You will find useful information here: cleaning and replacing clear parts (http://www.automotiveforums.com/vbulletin/showthread.php?t=514642)
Joe Blyth
09-12-2007, 11:33 PM
i am so sorry, forget to mention glue type...i'm a newb...anyway, i was using drips of Testors clear cement thingy and just dip a SMALL portion using a toothpick...thanks
Isn't Testors clear cement water-soluble? I'd try wiping it off with a wet q-tip before sanding it down.
Isn't Testors clear cement water-soluble? I'd try wiping it off with a wet q-tip before sanding it down.
Automotive Network, Inc., Copyright ©2025