car parts

I need to know some websites that have lots of parts with good prices for my eclipse (420a). For the most part i'm looking for a crank, rods and pistons. Eventually everything else...

I would just go on ebay and get the pistons and rods. You dont need a new crank, the stock one is fine. You can get bearings anywhere. You could try howellautomotive.com

Well see the thing is, i got the car for 700 bucks because it knocked. Number 4 rod had about 1/8 inch clearance between the rod and crank. The rod and crank is shot. So i decided i'm just going to rebuild the entire bottom end. But i'll try the ebay thing and the other website you gave me

I (http://www.slowboyracing.com) would hit up SBR, they should have a everything you need, but they are on the expensive side for some things so shop around. Are you really going to need a bullet proof botto end? If it were me, I would just buy a junk yard bottom end and use the crank and rod from that.

I agree with Th0r take it to any machine shop after finding a none damaged block... they do wonders with honing and cleaning

well eventually i'm going to put turbo nitrous and everything else you can imagine into this motor. i want rods that will hold up at 7 to 8 thousand rpm's. stock rods won't do it. but i'll sbr