RB Engine's

Do you have to get the rear as well if you get an RB swap into a 95 240sx?

pretty sure it works with the stock Rear end, just need a custom driveshaft, which is supplied in many kits. or just take the measurements and have a shop make you one.

u can buy a driveshaft as well as the motor and tranny mounts needed from McKinneymotorsports.com

that would probably be your best bet

keep in mind that if u r trying to put in a rb26 that u r going to need the rb25 transmission. just in case u didnt already know.

keep in mind that if u r trying to put in a rb26 that u r going to need the rb25 transmission. just in case u didnt already know.

I thought I read somewhere that with bucketloads of money and a good shop like McKinney, u should be able to use the rb26 tranny and have an awd 240. I think the only concern was that the rb26 tranny would be coming up through the floor board on the drivers side but a custom shaft could be made, hence the bucketloads of money.

BUT, I also read that for some reason the 240 isnt that great when it is awd. Dont know why but just remember hearing that somewhere.