removing harmonic balancer 92 cutless

On a '92 olds cutless ciera s 3.3 (V6), I removed the center bolt to the harmonic balancer. But I cant get the harmonic balancer off. How after the center bolt is removed do I get the harmonic balancer off so that I can replace the crank sensor behind it?

Thanks for whatever help!

You'll need a puller for this, and spray some lube into the keyway if you can that'll help.

Hope that helps

You'll need a puller for this, and spray some lube into the keyway if you can that'll help.

Hope that helps

Can it be pryed off with a crow bar or something? Lube? WD40?

If you pry it off chances are you'll bend the crank pulley and it'll wobble then rip your belt to shreads.

It probly on there pretty good, WD will work fine though.