95 blazer power windows

hi guys
I took the panel off the passenger door I new something broke,
well the nylon wheel broke out in the center, on the arm moves the window up and down,,, my question is this is held on with a rivot do i need to replace the whole mechanisim or somehow drill out the rivit and just replace the nylon wheel, I work in plastics what a way to do this... this sucks LOL please let me know the best way I did actually try apoxy to hold it seams to go up and down alright but won't last,,, thanks for any input kappy

no looks or nothing in 2 days comon little help here thanks

I'd suggest getting on ebay and replacing the entire window regulator. Should only be a few bucks to get a decent used one....


http://cgi.ebay.com/ebaymotors/1995-2004-Blazer-Jimmy-Window-motor-Regulator_W0QQcmdZViewItemQQcategoryZ33696QQihZ017 QQitemZ270159631206QQrdZ1QQsspagenameZWDVW

Tom I need the right passenger side wish I could by that, not a bad deal
though at all thanks

I'd keep checking ebay, as the MSRP on a new regulator for the passenger side is $323.39.

I see them often on ebay, so I think you'll find one soon.

Good luck!