Always put away your tools
08-30-2007, 10:15 AM
I had a theory that EGR could be cleared with vibration and used a massager so to speek on the valve and tube. Seemed to work then same problem.
Then I saw a photo of the intake end and realized I was sticking it at the wrong end
I took the massager and wrapped a towel around it. As it was barrowed I didnt want to damage it
Placed it on cold engine down at the base of the 90 degree air intake pipe and turned it on.
After a few I started it and ran it. With much longer time before light came on
I repeated it today once cold and then once when the light came on and
stop and go nor highway speeds then coasting didnt make Engine light go on.
Yesterday when I ran off to work I forgot the massager on the seat wrapped in the towel. My 5 yr old G Daughter got in with Grammy and found it.
What's this? she said. And my wife responded , Aw it's just another one of Grampa's tools.
Good Luck
Then I saw a photo of the intake end and realized I was sticking it at the wrong end
I took the massager and wrapped a towel around it. As it was barrowed I didnt want to damage it
Placed it on cold engine down at the base of the 90 degree air intake pipe and turned it on.
After a few I started it and ran it. With much longer time before light came on
I repeated it today once cold and then once when the light came on and
stop and go nor highway speeds then coasting didnt make Engine light go on.
Yesterday when I ran off to work I forgot the massager on the seat wrapped in the towel. My 5 yr old G Daughter got in with Grammy and found it.
What's this? she said. And my wife responded , Aw it's just another one of Grampa's tools.
Good Luck
Towncar
08-30-2007, 05:59 PM
Sounds like that massager is guilty of shaking up quite a few things over there :)
reekor
09-06-2007, 09:20 AM
Let me get this right, you placed the massager so to speek in your wife's wrong end ?
I had a theory that EGR could be cleared with vibration and used a massager so to speek on the valve and tube. Seemed to work then same problem.
Then I saw a photo of the intake end and realized I was sticking it at the wrong end
I took the massager and wrapped a towel around it. As it was barrowed I didnt want to damage it
Placed it on cold engine down at the base of the 90 degree air intake pipe and turned it on.
After a few I started it and ran it. With much longer time before light came on
I repeated it today once cold and then once when the light came on and
stop and go nor highway speeds then coasting didnt make Engine light go on.
Yesterday when I ran off to work I forgot the massager on the seat wrapped in the towel. My 5 yr old G Daughter got in with Grammy and found it.
What's this? she said. And my wife responded , Aw it's just another one of Grampa's tools.
Good Luck
I had a theory that EGR could be cleared with vibration and used a massager so to speek on the valve and tube. Seemed to work then same problem.
Then I saw a photo of the intake end and realized I was sticking it at the wrong end
I took the massager and wrapped a towel around it. As it was barrowed I didnt want to damage it
Placed it on cold engine down at the base of the 90 degree air intake pipe and turned it on.
After a few I started it and ran it. With much longer time before light came on
I repeated it today once cold and then once when the light came on and
stop and go nor highway speeds then coasting didnt make Engine light go on.
Yesterday when I ran off to work I forgot the massager on the seat wrapped in the towel. My 5 yr old G Daughter got in with Grammy and found it.
What's this? she said. And my wife responded , Aw it's just another one of Grampa's tools.
Good Luck
Towncar
09-06-2007, 06:21 PM
Let me get this right, you placed the massager so to speek in your wife's wrong end ?
Damn, this thread is going places..
http://img167.imageshack.us/img167/5766/lmao10187acsq4.jpg
Damn, this thread is going places..
http://img167.imageshack.us/img167/5766/lmao10187acsq4.jpg
Automotive Network, Inc., Copyright ©2026
