please help ............

I need a killer roll gage i got the idea on the roll gage but its not coming to well:banghead: the tutorrial in the af how to is ok but i just need a little bit more info on the how too like how to get the right width of the tubing so i could bend in easyer cause when i bend it snaps also anyone knows how to make a noz bottle and some f1 side mirrors

IM working on a 93 honda civic with open doors and trunk any help is well needed ill be very thankfull:grinyes:

What are you using to make the roll cage?

Have you tried heating the material before you bend it?

The right diameter tubing for a scale roll cage is around 3/16 diameter.

What are you using to make the roll cage?

Have you tried heating the material before you bend it?

The right diameter tubing for a scale roll cage is around 3/16 diameter.

:banghead: i didnt think to heat it up , thank u for the diameter for the tubing styrine tubes <--- i miss spelled styrine i think not sure anymore when i only sleep 2-3 hours a day:disappoin

anybody with the noz bottle how to......cause to buy them are getting to be a pain in my walletrunaround

sory i dont noz wot a noz bottel iz so i cant help :(

:lol: @klutz

Protiz80: Please take the time to use basic spelling and punctuation.

If you're not looking to spend the money for a aftermarket part then you will have to scratch build one.
Start out with looking for pics of NOS (not noz...) on google or any other search engine.
Basically start with a round cylinder and putty up the rest. But frankly, spend the five bucks for a aftermarket product (http://www.hiroboy.com/catalog/product_info.php?products_id=59) that has decals, PE. Its worth the money IMHO.
Considering that you want to add detail with a NOS bottle, then I would go for something that is easy and cheap. (Making your own will take a while, not to mention the decals and the details on the 'tap')

thank u for the the help.....

The right diameter tubing for a scale roll cage is around 3/16 diameter.

3/16?! That scales out to 4-1/2" diameter tubing. I usually use 3/32" as it is correct in scale, and most kits I have with roll cages use 3/32".

It's all MUCH less confusing when you use millimeters :D

3/16?! That scales out to 4-1/2" diameter tubing. I usually use 3/32" as it is correct in scale, and most kits I have with roll cages use 3/32".

Maybe it is 3/32, I'm not about to go searching through boxes of packed up models for people who are too lazy to use search and research.

Maybe it is 3/32, I'm not about to go searching through boxes of packed up models for people who are too lazy to use search and research.

You dont have the "Search" feature installed in your model closet?

You dont have the "Search" feature installed in your model closet?

:D :D

You dont have the "Search" feature installed in your model closet?

If I had a closet....maybe.