exhuast placing question
sackerius
11-17-2002, 04:29 AM
alright right now i have the DPI dx motor in my car.. i am gettin a full exhuast from the header back... (2.25 inch piping).. now all i am wondering is when i install my sohc vtec.. will the exhuast connect right.. or should i wait a couple months and then get the exhuast on with the vtec if it wont connect right... plz helllppp hehe
91civicDXdude
11-17-2002, 11:01 AM
The exhaust is the exact same size. the downpipes on both engines are the exact same length so it will bolt right together.
A little hint to those of you with d15b2: the stock d15b2 comes with a very restrictive 4-1 Manifold. if you can manage to find an exhaust manifold from a d16z6, it will bolt right up, and has much larger, 4-2-1 piping. This frees up some restriction, but not as much as an aftermarket header.
ALL SINGLE CAM D SERIES INTAKES/EXHAUSTS ARE INTERCHANGEABLE
A little hint to those of you with d15b2: the stock d15b2 comes with a very restrictive 4-1 Manifold. if you can manage to find an exhaust manifold from a d16z6, it will bolt right up, and has much larger, 4-2-1 piping. This frees up some restriction, but not as much as an aftermarket header.
ALL SINGLE CAM D SERIES INTAKES/EXHAUSTS ARE INTERCHANGEABLE
Automotive Network, Inc., Copyright ©2026