what Exhaust manifold?

Hi I have a 96 eclipse gs-t
i have a 3 inch greddy exhaust, blitz cold air intake, and i just put FIC 650cc injectors, 255 walbro fuel pump and Afc neo unit in.
But my question is i just bought a evo 3 16g turbo and i was wondering what kind of Exhaust manifold would be best for it.
thanks alot
any help would be appreciated!!

The stock manifold will work fine. I bought my 16G as a kit, and with that came a ported SBR manifold. Its basically the same as the stock 2G, other than the porting work. If you could get the stocker ported, that would probably be the easiest and cheapest solution.

:1:
The stock manifold flows very well, especially when its ported.

thanks alot for all the help
how would get it ported
or bored our bigger and how much would it cost you think
thanks again

Well you can either do it yourself with a carbide bit and a die grinder, http://www.vfaq.com/mods/porting-exhman.html or I think you can also send it in to Forced Peformance or Slowboy. I think there are a few people on the forums that can do it for a good price as well.

Or Thor :). I dont think I would ever port something for someone as I am not that confident in my skills but I have a ported 2g mani laying around if you want it.