intake manifold gasket

My car really only has problems when it gets hot but i want to sell it and i think it will be worth more if i fix it. I have a 95 3.1l and would like to change my leaking gasket. The only pronlem is i went to auto zone and they carried two kinds of gaskets and the difference was somthing with the pushrods. Does it matter because they both were made for the 3.1l but is one better than the other?i would like to know if one is better than the other so i can get that one comments appreciated:icon16:

Get the Fel Pro gasket set, I forget the # though the Zone and most other parts stores carry the Fel pro.

Here is a link for the procedure if you dont have one.
http://www.automotiveforums.com/vbulletin/showthread.php?t=688030

Here are the numbers for the Fel Pro sets. MS95536 (w/Ball & Pivot rocker arms; 1st Design; w/o push rod guides on intake gasket.) and MS90562
(w/Roller rocker arms; 2nd Design; w/push rod guides on intake gasket.) The latter number is a bit more in cost (about $10 or so.)

Hey Thankx for those #'s '97venture ! :D

No problemo, glad to help!

how do i know what i need? 1st or 2nd which is better?

You want 1st design!
and they all have the push rod guilds.