Help getting codes
nakedeye
08-02-2007, 01:28 PM
So I went to Autozone and they told me thay can't scan my 95 cause it's not obdII
I read about the paper clip trick, but I cant get it to work.
There is a connector that is two rows high. There are only three pins in it. There is one on the top row all the way at the end, and there are two on the bottom, one at the end and another one two spots over on the left.
Where do I put the paper clip?
I read about the paper clip trick, but I cant get it to work.
There is a connector that is two rows high. There are only three pins in it. There is one on the top row all the way at the end, and there are two on the bottom, one at the end and another one two spots over on the left.
Where do I put the paper clip?
xeroinfinity
08-02-2007, 02:01 PM
Your car is a hybrid ODB I-II, so no auto stores can read thsse.
Mostly only the stealership, and the very expensive scan tools, around $400-500, can read those DTC's.
Mostly only the stealership, and the very expensive scan tools, around $400-500, can read those DTC's.
Automotive Network, Inc., Copyright ©2026