91 dodge stealth no spark

A friend has a 91 dodge stealth it won't start checked for spark. No spark
so the coil pack was changed. Still no spark, think of checking the crank position sensor. What else should I check?:banghead:

PTU and ECU

I second that. If the plugs do not look fowled it is possible it could be bad wires too. But being that it is a first gen I would not be surprised if the caps in the ECU have leaked. To check the ECU just pull out the side panels in the center and you will find it behind the radio. Take out a couple screws and unpluge the 3 connections and then when you get it out take the shell off and see if any of the caps have leaked on to the board. A very commone problem on 1st gens.

Instructions for removal/inspection of both are available on www.stealth316.com

Thanks guys for the replys I'll try this a keep you posted on my progress.