brakes sticking...
91civicDXdude
11-10-2002, 11:53 PM
when im driving i get brake squeal. how do i stop the brakes from sticking?
Melt
11-11-2002, 11:11 AM
are you sure your pads arent low and its the little metal tab telling you to get new ones?
kris
11-11-2002, 02:09 PM
Originally posted by Melt
are you sure your pads arent low and its the little metal tab telling you to get new ones?
ditto
are you sure your pads arent low and its the little metal tab telling you to get new ones?
ditto
FourthGenHatch
11-11-2002, 02:40 PM
If your brakes are sticking they won't squeel, they will smoke since the rotor is burning up the pads. Sounds like you got what the other guys said.
91civicDXdude
11-11-2002, 08:34 PM
no i just replaced the pads/rotors about 4 months ago. i had a similar thread as to why my brake pedal goes to the floor and the brakes dont stop. also, it seems like they fade really bad. this made me think that the brakes were sticking and heating up the pads the whole time making the braking bad. then i listened as i was driving along and the brakes make a squealing noise like they are in need of pads, but how? i've bled the system, rechecked the pads, it is all good.
FourthGenHatch
11-11-2002, 09:13 PM
Pedal going to the floor with no braking is either air in the lines, low fluid, or your brake booster is dead.
jeef
11-12-2002, 01:08 AM
Originally posted by FourthGenHatch
Pedal going to the floor with no braking is either air in the lines, low fluid, or your brake booster is dead.
ditto... check your fluid level, try to rebleed and if it it still goes to the floor your master cylinder is prolly going buh byes...
Pedal going to the floor with no braking is either air in the lines, low fluid, or your brake booster is dead.
ditto... check your fluid level, try to rebleed and if it it still goes to the floor your master cylinder is prolly going buh byes...
BigBearWest
11-12-2002, 01:49 AM
it is your brake booster. my friend had the same problem that u just discribed
91civicDXdude
11-12-2002, 09:56 AM
normally if it is the brake booster it would be harder to push not easier. it isnt low fluid or bleeding problems. It is probably the master cylinder.
Automotive Network, Inc., Copyright ©2026
