Turn signals?

Hello I have a 2000 Sunfire, I ham having a problem with the turn signal. What it will do is when I engage the switch the blinker will work a few times and then quit, this will happen on either direction. then after the initial time the switch will only work one blink and stop. the Hazard lights work normally.
What I have done, I checked the 10a fuse for the turn signal, OK. Found the relay under the dash and found that I get power from the battery and the ignition terminals but not from the Hazard terminal or turn terminal.
What else is there that i can look at? or is the relay bad?
Thanks

Go ahead and replace the turn signal relay. It shouldn't be too expensive and is most likely the culprit. Hopefully:icon16:

I replaced it and it works like new thanks