Neutral Safety Switch

Okay i have a 94 Blazer 4x4 4.3w and the neutral safety switch is located on the steering coloum and it's a ratcheting neautral safety switch... but i need to know is there anything special i have to do to install the neutral saftey switch? or do i just leave it in park and pop the new one on and hook up the wires? i already have the old one off....:evillol:

You need to stay with the first post you started.

Did you check it out to be sure that is the problem?

There is a slide adjustment on them where the screws bolt it down.
You adjust by sliding it to it where the starter works in neutral or park position.
MT

there are no bolts or anything on my neutral safety switch it just clips in

there are no bolts or anything on my neutral safety switch it just clips in

One that one you will need to set your shift tube prong to line up with the switch slot before clipping it in.
And Take a close look at it for some kind of adjustment.
Good luck
MT