Proramming Needed

Can anyone provide the programming instructions for the remote to a 2002 Blazer's GM Aftermarket remote.

GM P/N 12490830 MODEL/FCC ID: EZSOEMTX

THANKS!

try this:

With all doors closed, hold down the power unlock button on the door panel.
Turn the ignition switch to the ON position.
Turn the ignition switch to the OFF position.
Turn the ignition switch to the ON position.
Turn the ignition switch to the OFF position.
Release the power unlock button on the door panel. The keyless entry receiver will respond with the following in order to indicate that the receiver is in the programming mode:
Locking the doors
Unlocking the doors

All transmitters (including extras) must be programmed at this time. When a new transmitter is programmed, it will deactivate the old transmitters.

Hold down the lock and unlock buttons on the transmitter until the remote control door lock receiver will respond with the following:
Locking the doors.
Unlocking the doors.

Repeat the last step above for each additional transmitter then turn the ignition switch to the ON position in order to exit the transmitter programming mode.

GO to here.. worked for me like a charm....especially if you buy one on ebay...

http://programyourremote.com/