Help installing alternator on 96 Grand Am

Can someone give me help getting the Alternator installed on my 96 Grand Am. I'm not sure why but I can't seem to get it back together.

Any help would be greatly appreciated.
Thanks

Can someone give me help getting the Alternator installed on my 96 Grand Am. I'm not sure why but I can't seem to get it back together.

Any help would be greatly appreciated.
Thanks


ok first of all if it is a 4 cylinder engine like my 99 all you have to do is get a 5/8 wrench so you can relieve pressure on the belt tensioner, route your belt thru the crankshaft pulley and the A C pulley, and under the belt tensioner,while relieving tension , then mount the belt on the alternator pulley and release the belt tensioner slowly. hope this helps good luck...:banghead:

I'll post something in the Tips and Maintenance section for this in a few.

I'll post the link here!

Try this here...
http://www.automotiveforums.com/vbulletin/showthread.php?p=4861410#post4861410

You still need help? I put one in a 94 in 12 degree weather without loosening the belt tensioner (didnt bring the right wrench and it was too cold lol) in Autozone's parking lot lol. What engine does it have?