Window Reg. How to rig it?
regalfriend
07-20-2007, 09:19 PM
97.5 GS...Both rear window regulators broke. I already replaced both fronts. I really dont want to replace 2 more....Is there a way I can rig them to keep the window up..Right now it has tape on the windows. It looks like crap.
fleettech
07-20-2007, 11:24 PM
if that is like my 01 right now I have a pair of small vice grips clamped on the regulator to hold the wifes up. mine popped the rf one sunday and the rr one today. its getting to be an expensive car repair week. easy to swap thou.
MisterBuick
08-14-2007, 09:49 PM
Gee, I thought I was the only one that did that? I used a small c clamp that will go with the car when I get rid of it.
fleettech
08-14-2007, 11:02 PM
well we ended up replacing 3 regulators this month on her car she asked why i didn't just order the drivers door one when I got the last one. oh well its paid for.
johnsonace
08-20-2007, 11:29 AM
When mine fail I use a piece of springy wood about the dimension of a yardstick, notched at the top and rounded at the bottom. It's cut slightly long and wedged between the bottom of the glass & the crease at the bottom of the door panel. Also add a strip of Scotch #33 tape along the top edge for safety.
This is temporary while waiting for the replacement regulator. As you probably know, the problem is almost always the plastic cable retainer on the slide.
I recently saw sites on Ebay selling the regulators, less motor, for about $20. That's way better than the ~$90 for the whole thing and WAY better than the $450 the Buick dealer charges.
It's a real shame that Buick did such a lousy job on this feature. Seems to be chronic with LaSabres as well.
Good luck
This is temporary while waiting for the replacement regulator. As you probably know, the problem is almost always the plastic cable retainer on the slide.
I recently saw sites on Ebay selling the regulators, less motor, for about $20. That's way better than the ~$90 for the whole thing and WAY better than the $450 the Buick dealer charges.
It's a real shame that Buick did such a lousy job on this feature. Seems to be chronic with LaSabres as well.
Good luck
MisterBuick
08-20-2007, 12:01 PM
I replaced all my window regulators 2 times except for one window that is a virgin. This car has been relatively trouble free except for the window regulators, window molding, and now a ignition switch. But like you said they sure did a lousy job on design. After my experience with the Buick I went to CRANK window regulators in my Dodge truck.:thumbsup:
dreager
08-21-2007, 01:29 AM
The sooner we get on it like VW owners the sooner people get refunded. Read here about the Class Action suit:
http://www.myvwlemon.com/ubb/Forum3/HTML/000084.html
http://www.myvwlemon.com/ubb/Forum3/HTML/000084.html
Automotive Network, Inc., Copyright ©2026
