help hookin up my system!

well this is what i got to start i have 2 of these 15's and one amp ! hows the best way to hook up for best sound ! i have a spare 1000 watt sony ! 2 channel but its not enoungh power i dont think ! i just wanna use this new amp!
! XO 15"

http://www.americanbassusa.com/images/xo15.gifFeautres
1. CARBON MICA INJECTION MOLDED CONE.
2. RUBBER SURROUND
3. 2.5 INCH FOUR LAYER HI-TEMP VOICE COIL
4. DVC 4 OHM.
5. 150 OZ. MAGNET
6. DUAL MIRROR NOMAX SPIDERS
7. THE CONE AND SUROUND ARE STICHED AND GLUED
8. THICK HI-CURRENT TINSEL WOVEN ON SPIDER
9. 1000 WATTS MAX, 500 RMS. Sony XM-D9001GTR

1300W Class D Mono Amplifier

http://www.onlinecarstereo.com/images/spacer.gifhttp://www.onlinecarstereo.com/UIControls/cachedimageservice.axd?data=1b0d9b07-52b3-4834-9926-0f3dfa43fcf4 (http://javascript<b></b>:launchWindow('ImageViewer.aspx?ImageName=Sony__XM-D9001GTR.jpg&Model=Sony XM-D9001GTR',541,800,'status=no,toolbar=no,scrollbars =no,menubar=no,location=no,resizable=yes'))
http://www.onlinecarstereo.com/Images/viewlarger.gifView Larger Image (http://javascript<b></b>:launchWindow('ImageViewer.aspx?ImageName=Sony__XM-D9001GTR.jpg&Model=Sony XM-D9001GTR',541,800,'status=no,toolbar=no,scrollbars =no,menubar=no,location=no,resizable=yes'))http://www.onlinecarstereo.com/images/spacer.gifItem# 16547Regular Price: $179.00Our Price: $147.00 http://www.automotiveforums.com/vbulletin/../images/buttonBuy_ov.gif (http://www.onlinecarstereo.com/CarAudio/AddToCart.aspx?ProductID=16547) http://www.onlinecarstereo.com/images/spacer.gifhttp://www.onlinecarstereo.com/images/spacer.gifItem On SaleMSRP:$299.00You Save:$152.00 (50%)Condition:Brand New, Factory SealedAvg. Rating:http://www.onlinecarstereo.com/Images/Star4half.gifhttp://www.onlinecarstereo.com/images/spacer.gifhttp://www.onlinecarstereo.com/images/spacer.gifhttp://www.onlinecarstereo.com/images/freeShippingIcon.gifFree UPS Ground Shipping!!http://www.onlinecarstereo.com/images/spacer.gifhttp://www.onlinecarstereo.com/images/spacer.gifhttp://www.onlinecarstereo.com/images/rtg_rate.gif Rate and read reviews. (http://www.onlinecarstereo.com/CarAudio/ProductReview.aspx?ProductID=16547)http://www.onlinecarstereo.com/images/spacer.gifhttp://www.onlinecarstereo.com/images/IconArrowBlueDown.gif Technical Specification

<LI class=NormalSmallBlue>RMS Power Range : 550-900 Watts (http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=16547#) <LI class=NormalSmallBlue>Number Of Channels: 1 (http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=16547#)<LI class=NormalSmallBlue>Maximum Power: 1300 Watts (http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=16547#) <LI class=NormalSmallBlue>Built In Crossovers: Yes (http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=16547#)
Channel Separation: Yeshttp://www.onlinecarstereo.com/images/IconArrowBlueDown.gif Features

1300W Max Power
550W x 1 RMS into 4 ohms
900W x 1 RMS into 2 ohms
Active Thermal Control
Dynamic Distortion Supressor
Active Thermal Control
CEA-2006 Power Compliant
Line level thru-put
High Level Sensing Power On
Dynamic Distortion Supressor
40 Hz EQ boost
MOSFET output stage & power supply
Variable 50 - 300 Hz low pass filter
RCA & speaker level inputs
Subsonic filter (15 Hz)Warranty: 1 Year Onlinecarstereo.com warranty. (http://javascript<b></b>:toggleQuestion('tg1', 'qg1', 'ag1'))1 Year warranty from Onlinecarstereo.com implies that repairs must be returned to Onlinecarstereo.com, not the manufacturer. More information can be found in our help section under returns & warranties. how would be the best way to hook up and get best sound ! all help is needed!
:banghead:

did you already buy it? i hope not, but it sounds like it.

those subs are not matched very well (impedance wise) to that amp

They may not be matched correctly but since the amp puts out mono 900W RMS into 2 ohms he can use 1 voice coil on each sub wired parallel to get the 2 ohm load and have an effective 1000W RMS and 2000W Peak power handling for the system plus an spare set of VC connections if he does burn the one pair of VC's up. Or just use 1 sub wiring the 2 VC's in parallel and keep the other for a spare replacement and get the same results.

:shakehead

:shakehead

Regarding???

Regarding???

if a sub comes with 2 voice coils you have to use both. Companys adding more then 1 voice coil was so that you had better options in terms of ohm loading and it's not an option to not use them. it will be like running a engine with you pulling out half of the spark plug wires.

American Bass? Is that the brand? Found a post online saying they ain't bad.
http://www.realmofexcursion.com/forum/showthread.php?p=29710

I would throw that Sony product in the trash (its all its good for) or return it.

Get a more proper amp that will closely match the RMS. I'd only hook up one personally, but here is a guide to help you wire it properly, whether you want one or two.
http://www.the12volt.com/caraudio/woofer_configurations.asp

******** Warning *************

Do notconnect Just One Coil Of A Dual Voice Coil Sub To An Amp

********* Warning *************

Ok, I admit not knowing much about dual coil speakers, never messed with them personally. Still the 2nd option of using 1 speaker in a parallel wiring with the amp he wants to use is still valid.

yes, that is ok .... but leaves out a sub, hence my original comment that the amp was not very well suited to the subs (if you want to get full power from the amp).