parking brake

Hi, I have a 99 Chev Lumina. 3.8L with 4 wheel discs.

Recently replaced the rear rotors, pads and calipers.

(parking brake) The passenger side works great. The driver side doesn't seem to have enough cable to fully release. When I remove the cable the rotor spins freely. But with the cable attached it is quite tight.

I can see the adjustment for the passenger side, but do not see an adjustment for the driver side.

Can anyone give any insight into this?

Please help.

Thanks.
Hearts88

Check for the cable binding internally,l both cables are adjusted as one.