fog light type bulbs please reply need help
s2pidluv4u
06-26-2007, 12:15 AM
hi i own a 1995 3kgt base model and was wondering what kind of fog light bulb does it use is it H3 i am planning to buy yellow bulbs for it the stock one sucks ass and how do u replace the blubs i tried taking it out but its sooooooo confusing please help me and if u do have a tutorial or pics please send it thanks
mr3000
06-26-2007, 12:56 AM
yea they are H3's
dhrubio
06-26-2007, 01:34 AM
hmm idk what kind of fog lights you have, but they should be very easy u just need a philips screwdriver n thats it!
s2pidluv4u
06-26-2007, 02:16 AM
i have the stock fog ones for the 1995 how do i change the light bulbs what philips screw driver do i have to remove the front bumper? can any1 show me how like a pic or somthing thanks in advance
dhrubio
06-26-2007, 03:12 AM
you dont need to take off the bumper or anything else, except the fogs...u need this
http://www.girr.org/girr/tips/tips6/tool_tips/no_1_phillips_small.jpg
just sit down in front of ur car, bend forward, look at the foglight, and youll see a couple screws around it...unscrew them, pull the fog light out a little bit (two wires will be connected, so u cant pull too far)...then take out 4 screws from the little black box inside the foglight u just pulled away, and it should be separate...and switch the bulb......just go out there and do it, you dont need to know anything to do this
http://www.girr.org/girr/tips/tips6/tool_tips/no_1_phillips_small.jpg
just sit down in front of ur car, bend forward, look at the foglight, and youll see a couple screws around it...unscrew them, pull the fog light out a little bit (two wires will be connected, so u cant pull too far)...then take out 4 screws from the little black box inside the foglight u just pulled away, and it should be separate...and switch the bulb......just go out there and do it, you dont need to know anything to do this
jason_bet
06-26-2007, 09:49 AM
I love the picture man.. thats some crazy tool you got there haha
dhrubio
06-26-2007, 11:53 AM
i know, lets hope he can find one :-/
Linebckr49
06-26-2007, 11:54 AM
on the 91-93 foglights, there are actually 10mm bolts with a philips screw head in the middle. if the screwdriver strips the head, you can always use a 10mm socket + rathet + extension to remove the bolts. not sure how the foglights are setup on 94+ cars.
dhrubio
06-26-2007, 12:02 PM
yea i forgot to say BE CAREFUL when taking out the screws!!! on my 94 its very easy: just 3 screws
Automotive Network, Inc., Copyright ©2025