Carb Suggestions?

Most of you know I have a Mustang 351 Cleveland blah blah blah 4V intake and such. Me and Dad are going to be throwing performance upgrades at this thing. It's normal operation range is from idle-5600 rpm's. Has a C-6 3 speed. I want to know the best cfm carb. Most likely it's getting full exhaust,edelbrock heads,a mild cam,edelbrock intake or a weiand intake,new distributor, basicly the works. I suck at knowing the best carb for such an build. Also if anyone had a cam idea i'm open to suggestions. Thanks.:grinyes:

I'd call comp or crane for the cam, and run a 650 Holley dp carb.

I'd call comp or crane for the cam, and run a 650 Holley dp carb.I checked that out. It only has manual choke my dad's car is electric.

650, depends on the cam. 600 or 700 might work as well, but there are variables :)

650, depends on the cam. 600 or 700 might work as well, but there are variables :)
Almost anything can be tuned :wink: .
Just fyi my carb doesnt even have a choke.

Almost anything can be tuned :wink: .
Just fyi my carb doesnt even have a choke.

Or Horn for that matter:D

Or Horn for that matter:D
This is true.. but I do have a BOV that makes this really cool sounds after my WG gets to do its thing!