Ignition switch double check.

Ok, I have worked on my wiring on my ignition switch. I think I have it right. However Im having a problem. My ign is trying to start the car while the key is off. I replaced the ign key cylinder and may have messed that up. Regardless. If anyone one could look under their dash and verify this I would greatly appreciate it. I might be just needing to replace the unit.


pin1 pin2 pin3 pin4 pin5 pin6
__________________________________________________ ____________
XXXX | black | green | B | tan | tan/wh/ | xxxxxx |
__________________________________________________ ____________
TAN |black/white| XXXXX | C | XXXXX | PINK | ORANGE |
__________________________________________________ _____
YELLOW | RED |tan/black| D | black |RED/WHITE | brown |
__________________________________________________ ____________


bold colors are thick wires
thin words are thin wires.


Any help would be appreciated. GotoGod