Key fob.
airtight_python
05-07-2007, 11:54 PM
I hear I can very easily add keyless entry to my 02 Silverado. I currently do not have keyless entry, but I do have power locks... so apparently I just need the correct key fob.
Can anyone verify this and/or point me to the correct key fob model number?
Thanks
Can anyone verify this and/or point me to the correct key fob model number?
Thanks
airtight_python
05-09-2007, 01:12 PM
Nada from anyone? I ordered a fob anyway... will let you know if it works.
Onblsht
05-09-2007, 04:55 PM
You sure you didn't already have keyless entry installed on the Silverado if you purchased it used?
The correct remote you need is FCC: KOBLEAR1XT, Part # 15042968
The correct remote you need is FCC: KOBLEAR1XT, Part # 15042968
airtight_python
05-09-2007, 05:30 PM
Many thanks. That is the fob I purchased... I don't know if the vehicle had keyless entry. I did purchase it used. I don't think it would though because it's essentially base model. I have power locks, but not windows. Believe there is any chance of it working?
TexasF355F1
05-09-2007, 07:25 PM
I doubt it'll work. You'll need a receiver to pick up the signal from the fob. Even if there is one, they need to be on the same signal wave. Call up the dealer.
I don't understand how you can have power locks, but not windows. Especially with an '02. They go hand in hand. Unless the locks were installed aftermarket.
I'd call a dealership and talk to them about it.
I don't understand how you can have power locks, but not windows. Especially with an '02. They go hand in hand. Unless the locks were installed aftermarket.
I'd call a dealership and talk to them about it.
Automotive Network, Inc., Copyright ©2026
