Head Torq Specs & Sequence on the 3.4L

The intake push rods are approx 5.75 inches , the exhaust is approx 6 inches in length.

Here is a pic of the head(yours may not look identical to mine though) config w/torq sequence.
The torq specs are 37 ft lbs and then an additional 90 deg(1/4 turn).
http://i28.photobucket.com/albums/c242/xeroinfinity/Models/3.jpg

The yello "I" are Intake
The blu "E" are Exhaust
Red #'s are the torq sequence

I'll be posting the rest of this, with the rocker arms and exhaust manifold specs shortly.