Programming Instructions for Remote

I just bought a replacement remote for my 93 Buick Park Ave Ultra, but it didn't come with instructions. Would appreciate any help with this.
Thanks.

For better visbility I moved your post to Park Avenue. Tips & Maintenance was just intended for the specific tech procedure.

Jump the (ALDL) Assembly Line Diagnostic Link. You will find this connector under the driver side dash, but you will have to look through a square cut out in the panel to see the connector, it is recessed behind that panel, almost directly under the steering column.

Jumper pin A to pin G with a fused jumper (3A)
Doors will lock and unlock
Press the UNLOCK button on the remote
Doors should lock and unlock again
if you have more remotes press their unlock button (up to 4)
remove jumper wire
________|________
[F] [E] [D] [C] [b] [A]
[G] [H] [J] [K] [L] [M]

Question about this. I have a 96 PA and it has OBDII with what looks like 16 pins. CAn i use the same procedure to program a remote to this car? BTW this remote is from a 97 PA.

Welcome to AF. Please start a new thread with your question and link this thread in your new one, as a reference. Please read the link below:

Posting in Closed or Outdated Threads-PA (http://www.automotiveforums.com/vbulletin/showthread.php?t=635164)


http://img326.imageshack.us/img326/4093/threadclosedga9.gif