ICM / Coil Packs
Brass_GA
05-02-2007, 12:36 PM
I have a friend that just lost his ICM. I have access to a module and coils from a 3100. His is a 3400.
Would the module and packs be a suitable replacement?
Would the module and packs be a suitable replacement?
xeroinfinity
05-02-2007, 01:56 PM
What years!!
The 98 3.1 coils and ICM are the same part # as a 2000 3.4.
ICM # 10489422 and the coils # 10472401
So yes it should work, if the plug on the ICM is different then obviously it wont work.
Hope that helps!
The 98 3.1 coils and ICM are the same part # as a 2000 3.4.
ICM # 10489422 and the coils # 10472401
So yes it should work, if the plug on the ICM is different then obviously it wont work.
Hope that helps!
Brass_GA
05-02-2007, 03:59 PM
Would the pin configuration on the plugs the same? Assuming they fit.
xeroinfinity
05-02-2007, 06:00 PM
should be they are the same through most of the newr 3.1 & 3.4's -05'.
Brass_GA
05-02-2007, 07:14 PM
They were the same. I had it switched out in under an hour. I don't think it helped our problem though.
Thanks for the input.
Thanks for the input.
xeroinfinity
05-02-2007, 07:26 PM
check the fuses and the wiring.
Also make sure no pins in the ICM plug are bent or broken :eek:
Also make sure no pins in the ICM plug are bent or broken :eek:
Brass_GA
05-03-2007, 07:07 AM
The pins are fine but we didn't have time to unwrap the wires. The car still runs. I haven't looked at the fuses yet but I assume there is one for each coil or cylinder.
Automotive Network, Inc., Copyright ©2026
