windshield wipers

well today i fond out that my wipers did not work. i checked the wiper mechanism. i found 2 loose wires, and i have no idea where this two wires go at. anyone have a wiring diagram for the electrical in the wiper assy by the firewall?

(edited)
well i fixed my lil electrical problem. but i found another problem as well my washer fluid is not coming out off the nozzles i went out nd bought a brand new pump, but it still does not pump out. i have a feeling the problem is in the board. does anyone know the proper way to check if board is working correctly?
http://i74.photobucket.com/albums/i244/xronic2004/apr26_004.jpg
pic of board.

http://i74.photobucket.com/albums/i244/xronic2004/apr26_005.jpg
back end of pump

can i purchase this board new if bad?, before anyone says anything all hoses are all clean not clogged

That board is for the intermittent wipers, I believe.

Do me a favor. Can you take a picture of the wiper motor assembly in the car and post it here?

Can you hear the pump whine when you try to spray? mine doesnt work either but i can still hear the pump whine when i push the buttion.

That board is for the intermittent wipers, I believe.

Do me a favor. Can you take a picture of the wiper motor assembly in the car and post it here?

well to the way i saw the board theres a power wire from theboard to one side of the pump, and a b+ wire (no idea what b+ stands for) that goes to the other side of the pump. ok i will. to make sure i get what you are looking for what exectly is it that your talking about?

Can you hear the pump whine when you try to spray? mine doesnt work either but i can still hear the pump whine when i push the buttion.
no i can not hear the pump wine

well to the way i saw the board theres a power wire from theboard to one side of the pump, and a b+ wire (no idea what b+ stands for) that goes to the other side of the pump. ok i will. to make sure i get what you are looking for what exectly is it that your talking about?


no i can not hear the pump wine

I want to see what the motor looks like. My guess is the board is a part of the intermittent wiper motor, but I can't be sure without looking at it.

so basically you want a picture of the unit with everything put bck together

yeah it could be an electrical issue if the pump is new and you cant hear it.

Look at that board closely with a light behind it and see if any of the soldered connections are bad or have light coming through. Also look for any broken or loose components on the board. Check for cracks on the board and the components. Could be as simple as a "cold solder joint". Ive seen many with this problem. Even if you dont see one sometimes taking a solder gun to each contact will cure the problem. Its worth the try if the board is already out and a suspect.

http://i74.photobucket.com/albums/i244/xronic2004/apr27_003.jpg
http://i74.photobucket.com/albums/i244/xronic2004/apr27_002.jpg
http://i74.photobucket.com/albums/i244/xronic2004/apr27_001.jpg
http://i74.photobucket.com/albums/i244/xronic2004/apr26_001.jpg
http://i74.photobucket.com/albums/i244/xronic2004/apr26_002.jpg

here are the pics i got the wipers to work normal but yet yeah i still can get the windshield washer to work