FS: GReddy 60mm bst + egt, profec-S, safc2, PIAA 1100x, CF Slvr +++ more

get it before it goes on ebay!

this post is off memory and i'm at work, the goods are at home and i just moved so no internet yet. i'll add to the details and post about it.

any serious prospects email me: [email protected]

i'm pretty sure that all of these parts came direct from RRE and the dealer. PIAA's came from a dealer guy at a stereo shop.

GReddy 60mm Peak/Hold Boost [white w. green reading], w/ control box, boost box

GReddy 60mm Peak/Hold EGT [silver w/red reading], w/ control box [missing sensor and sensor wire]

Autometer F/A Ratio Knight Rider gauge, w/ wires

GReddy profec type-S, w/ connectors, boost box, stepping motor

Apex'i SAFC2, cord has no plugs on the end. should be able to get from Apex'i

Real PIAA Spark Blue 7500k bulbs. still rocking like new.

PIAA 1100x Platinum fog lights, open box, never installed or used

R and L front wheel splash gaurds, new in plastic from the dealer.

interesting story behind the splash gaurds:

i'm at RRE picking up my new beast with new evo turbo, cams, cam gears ported everything. the front facasia is off from the work. too much of a pain in the ass to put it on to go tune. so off i go with Roy [roysgsx of 800hp gsx fame, like 4 or 5 mag covers] in the pass seat with the laptop to tune the SAFC for sale above. we do 4 or 5 runs and start smelling someting burning, so we pull over to see what is up. the wheel wells have bent back from the high speed runs and been frying against the tires, so there are perfect crescents cut into the wheel wells, on the outsides. i drove home with the front off so they got a bit worse, but for a second there, with the front off and the FMIC in full view, pipes all over, it looked cool...


there may be a few more things, i'll update as neccesary.


new value: over $1200.00

i should charge more that that for 'historical value', being from my car and all, but i'll refrain from that.

$450 bucks takes it all. i would guess shipping to be around 50 bucks [i really have no idea at this point] and INS would be mandatory.

i'll give it a few days up here before i put it up on EBAY, or if there are some serious guy's on here i'll give you some time to make good on it with a deposit or soemthing. i got a lot out of these boards from Kevin and some others that are long gone, so i would love to give back.

i don't really want to part it out, i just want one big bang for all of it. i'll let you know if i change my mind, so don't ask just yet. i would suggest getting together with someone else on here and splitting the booty. i'll take 2 diff payments and split the contents so there are no worries.

remember to email me so you get direct contact with me ASAP.

[email protected]

myspace: http://www.myspace.com/djvincecarter


***UPDATE***

i just got home and found out that some wonderful neighbor has the greatness upon them to put out an unsecured wireless network on a pretty fast router! yay!

so on with the update.

for the profec and both 60mm peak hold's there are no wire harnesses. just the gauge, the box, and that is it. i'm going to do sime research for the wiring harnesses to find ot how much etc. they are going to be and how it will effect price etc.

make me an offer on the lot, i'm approaching get rid if it mode.

pics to come of the lot.

Well what if we dont want the whole thing. I mean the boost controller and the SAFC2 I am interested in. Mostly the boost controller though.

check your PM's