Skunk2 Intake Manifold - Need an install guide

Hi about 6 months ago I finally got my Skunk2 intake manifold installed after plenty of problems. The thing didn't come with any installation papers and I figured it really couldn't be that hard. Yea right. Well I ghetto rigged a lot of stuff and now I want to do it right. I'm getting a fuel pressure regulator, fuel rail, and new injectors (busted the filter off 1 of mine). So now I get to rip the thing apart and do it right this time. I was told originally that I didn't need a gasket for the intake by a person on hondacura.net (very very stupid person apparently). Well I just ordered a Hondata gasket so that's solved. I also know the correct torque for the bolts on the head also. My only problems are these:

I dont know exactly what is suppost to go on with the vacum lines. Does anyone have a diagram for what to do with the charcoal box and all that. Remember I dont know what all these things are called so naming them doesn't do a huge amount of good.

Bottom line is I've been looking for an install guide with nice pictures, but I'm just not finding one. If someone has a Skunk2 on a B series engine can you take pictures. I'm really lost. Pictures of all the hosing are the most useful to me.

BTW: It's a 1994 Integra GSR (OBD-1)

Thanks,
Tim

"Charcoal Box" -hopefully the one on the back of the engine under the intake manifold is the "thingy" that your Positive Crankcase Ventilation (PCV) valve should connect to. You should have a line from the intake manifold into the PCV valve and from there into the "Charcoal Box".

OMG

yourk..... C.A.P OR ADVANCED AUTO PARTS, and get a chiltons manual, it will tell u exactly how to put an intake manifold on and its only 14.99. before u doubt it buy it, i would recomend buying a helms but its 68.00 shipped....