After market engine question
k-townracer
04-08-2007, 12:42 AM
I have a 1998 neon sport. would it be possible to put a 3.0 dohc or possibly a supra engine rather then the stock 2.0 dohc. any advise and or info would be great. thank you for any advise you can give me.
das2123
04-10-2007, 07:41 AM
If you have enough money, time and know-how...then anything is possible.
The most common swap for the neon is the 2.4 from 98-01 Chrysler engines. You can also swap in the SRT-4 engine, but that takes quite a bit of rewiring.
The most common swap for the neon is the 2.4 from 98-01 Chrysler engines. You can also swap in the SRT-4 engine, but that takes quite a bit of rewiring.
k-townracer
04-11-2007, 05:37 PM
If you have enough money, time and know-how...then anything is possible.
The most common swap for the neon is the 2.4 from 98-01 Chrysler engines. You can also swap in the SRT-4 engine, but that takes quite a bit of rewiring.
how much rewiring would be needed to put in the SRT-4? and would it still be compatible with the existing 5 speed tranny?
The most common swap for the neon is the 2.4 from 98-01 Chrysler engines. You can also swap in the SRT-4 engine, but that takes quite a bit of rewiring.
how much rewiring would be needed to put in the SRT-4? and would it still be compatible with the existing 5 speed tranny?
das2123
04-11-2007, 08:29 PM
There is alot of rewiring for the SRT-4 swap and it is compatible with the 1st gen tanny.
k-townracer
04-15-2007, 05:24 PM
There is alot of rewiring for the SRT-4 swap and it is compatible with the 1st gen tanny.
can i put a tubo on the SRT-4 as is, or do i have to put other things on it too?
can i put a tubo on the SRT-4 as is, or do i have to put other things on it too?
das2123
04-15-2007, 08:16 PM
can i put a tubo on the SRT-4 as is, or do i have to put other things on it too?The SRT-4 has a turbo on it already.
k-townracer
04-24-2007, 05:08 PM
The SRT-4 has a turbo on it already.
where could i find an SRT-4 engine, and how much would one cost?
where could i find an SRT-4 engine, and how much would one cost?
das2123
04-24-2007, 08:17 PM
where could i find an SRT-4 engine, and how much would one cost?Try ebay or www.car-part.com and will run you anywhere from $1000-$3000.
k-townracer
05-01-2007, 07:21 PM
Try ebay or www.car-part.com (http://www.car-part.com) and will run you anywhere from $1000-$3000.
I try'd looking for the SRT-4 engine on www.car-parts.com (http://www.car-parts.com), and could not find it. what do i need to go to on the site to find the SRT-4 engine?
I try'd looking for the SRT-4 engine on www.car-parts.com (http://www.car-parts.com), and could not find it. what do i need to go to on the site to find the SRT-4 engine?
das2123
05-02-2007, 07:28 AM
Put 2003 for the year, engine, and then what city or state you are in and click search. It will then prompt you for which engine you want and then click on the "w/turbo (VIN "S")" and click search again.
SimonTempler
05-03-2007, 08:30 PM
Don't forget the stratus engine also and go all motor.You would need a Mopar Proformacne ECU,MegaSquirt or a A/FX and a harness from a DOHC neon
das2123
05-03-2007, 08:32 PM
MS would be overkill for a N/A engine.
SimonTempler
05-03-2007, 08:38 PM
No doubt just throwing out some options and what not oh check crigslist for srt 4 I've seen those two engines on e-bay the last one went for 800 or less and try neon.org
Automotive Network, Inc., Copyright ©2025