No High speed on heater fan
ndav8r
04-07-2007, 10:41 PM
Hi Gang:
I had just replaced the heater fan and fan resistor on my daughter's 01 Malibu. It did not function at all. When I pulled it apart, the fan was stuck pretty good. I did manage to work it loose. I did'nt consider reusing it so I purchase a new fan and resistor from Napa. Now when I turn on the heater
fan, I only get the first 4 speeds, not High!:banghead:
Any Ideas? I am going to check for fuses or relays next.
Thanks, NDAV8R
I had just replaced the heater fan and fan resistor on my daughter's 01 Malibu. It did not function at all. When I pulled it apart, the fan was stuck pretty good. I did manage to work it loose. I did'nt consider reusing it so I purchase a new fan and resistor from Napa. Now when I turn on the heater
fan, I only get the first 4 speeds, not High!:banghead:
Any Ideas? I am going to check for fuses or relays next.
Thanks, NDAV8R
Negatoro
04-08-2007, 02:32 AM
blower motor high speed fuse.. underhood junction block :-D i think it's 30A.. maybe 20A.. or 10/15... maybe 25 amp
ndav8r
04-09-2007, 08:21 PM
Hey There:
As it turns out number 53 fuse (30 amp) was blown in the relay panel under the hood. Thanks for your Help!
NDAV8R
As it turns out number 53 fuse (30 amp) was blown in the relay panel under the hood. Thanks for your Help!
NDAV8R
Negatoro
04-10-2007, 02:23 AM
No problem, man.
..been there, done that.
..been there, done that.
Automotive Network, Inc., Copyright ©2025
