White gauges for P10?

Any body know where I can get white gauges for my P10? Also a problem is that I need a diesel rpm gauge back. (0 to 6000 rpm, redline from 5500 to 6000).

here are my white guages on my P10

www.importintelligence.com <<<< has them, but they are vinyl stickers...I have them--->>they are only like $25, look great

drockg20- where did you get those? how much? stickers or actual replacements?

Yeah D .. tell us.. I have the import Intelligence ones but I am afraid to crack open my Dash myself.. Does anyone know how difficult it is ?

www.importintelligence.com <<<< has them, but they are vinyl stickers

I am confused. I went to the site and reviewed the pictures. The 91-93.5 have a 7500 redline and the 94-96 have a 7200 redline. It looks as if they mixed the pictures up. Also, don't all '91 to '96 G20's have the 7500 redline.

I have a '96 and it's redline is 7500.

Just wondering.

OOPS!

The 91-93.5 have a 7500 redline and the 94-96 have a 7200 redline

I meant the other way around.

Correction: The 91-93.5 have a 7200 redline and the 94-96 have a 7500 redline according to the pictures on their site.

poppy_morenito>>>it isn't too hard, but you just need patience. The hardest part of the whole project is placing the needles back to where it belongs. I had to approximate where exactly the gas, temp, rpms, and speedometer go...

I have the importintellegance ones. The install is not that bad. I took off the steering wheel and then took off the piece surrounding the gauges. When you get them from import inttelegance, they come with excellent detailed instructions. The only tricky part is taking off and re installing the needles.

I did not take off stering wheels it is easy to do Shawn Parker when come to st.peteburg to get my parts i will show you all the secerts. my guages are import intellgence too.

Can you get them in km/h instead of mp/h?

yeah i didn't take off my steering wheel off either...All you gotta do is take the plastic around the steering wheel off, which is held on by a couple of screws. After that, there are screws that hold the instrument gauge cluster, and everything pretty much comes out. You won't need to unplug any wires or anything, so don't worry bout that. When you buy the gauges, the directions are VERY detailed and I don't think u'll have a problem.

As far as km/h, I don't think they make them---at least not in the US. good luck.

Originally posted by drockg20
I did not take off stering wheels it is easy to do Shawn Parker when come to st.peteburg to get my parts i will show you all the secerts. my guages are import intellgence too.

Well maybe, but you want me to pull of the parts and pay for them ...loland

does anyone know a place (other than importintelligence.com) that sells white gauges for p10?

Originally posted by GtRider
does anyone know a place (other than importintelligence.com) that sells white gauges for p10?

Nobody else does. They would have to be custome made. I used to know of a site, where they would custome make them for you. But you had to send them your cluster. I will see if I can find it, but I probably wont be able to.


No offense to anyone with the sticker gauges, but they look like ass IMO.

WELL I JUST ORDERED THE WHITE GUAGES AND SONIC BLUE NEEDLES FROM IMPORTINTELLEGENCE. I WILL LET YOU GUYS KNOW HOW THE INSTALL WENT AND IF THEY ARE WORTH THE MONEY.:)

Originally posted by RYANS
WELL I JUST ORDERED THE WHITE GUAGES AND SONIC BLUE NEEDLES FROM IMPORTINTELLEGENCE. I WILL LET YOU GUYS KNOW HOW THE INSTALL WENT AND IF THEY ARE WORTH THE MONEY.:)



http://www.users.qwest.net/~bkc3/+junk/capslock.gif


OK WE WILL LOOK FOR YOUR REPLIES.

OK RYANS.
THANKS FOR LETTING US KNOW.
I CAN'T HEAR YOU ACROSS THE COMPUTER.


.. rofl kbslacker.

I think the 7200rpm one was taken from an auto, and the 7500rpm ones for a 5-spd. I don't remember seeing any changes in teh gauge cluster from 91-96, except for the auto to 5-spd difference in the tach.
I'm sure someone will correct me if i'm wrong though. :D

Good Luck Ryan!:smoka:

for those of you that have the import intelligence guages- how does it look at night. i'm assuming it looks good, but wanted your opinions. i'm probably going to get them, but was just wondering the "night look."

greekman deno this is derick

look at my pic on here or call me and i will tell you.

they sent my stuff out yesterday so i should be receiving it any day
hope to have pics up by this weekend

OKAY GUYS I RECIEVED THE PACKAGE TODAY! I HAVE EVERYTHING INSTALLED. BUT JUST TRYING TO GET THE NEEDLES PACK TO WHERE THEY WERE. THE OVERLAYS LOOK PRETTY GOOD. I WILL HAVE PICTURE UP HOPEFULLY THIS WEEKEND. :)

okay i got it done still a little work with the needles. it looks amazing. can't wait to post pictures of it(hopefully this weekend)

what happen to the pics?