Emission Failed
vcfstr
03-31-2007, 01:14 PM
I just had my emission checked and failed. I have a 2000 Passport and am getting really sick of mechanics doing un-necessary repairs. I want to get the upper hand this time, hehe. The fault codes that showed up this time on the test were P1404 and P0463. I have an check engine light that is on more than it is off and a fuel light that follows suit. My gas gauge also is on a hype and indecisive and can't figure out whether I have a full tank or empty tank. Do I need to clean the ERG valve or replace it? Do I also need to replace the fuel sending unit? Thanks for listening to me rattle on.
marcre
03-31-2007, 01:57 PM
sounds like you need the fuel sending unit replaced. Also, give the EGR and the tubes a good cleaning. See how that works. If it doesn't do it, replace the EGR. It is real simple to do. I had to replace my EGR last year at this time. I went to a junkyard and grabbed one for around $20.
marc
marc
trooperbc
03-31-2007, 05:33 PM
check out the FAQ in the sticky thread at the top of the forum list, it's the first one
http://isuzufaq.ibctech.ca/#faq1
//bc
http://isuzufaq.ibctech.ca/#faq1
//bc
Automotive Network, Inc., Copyright ©2026
