sir front bumper
b20v
10-10-2002, 10:26 AM
can i get the sir front bumper and still get aftermarket head lights?
91zc
10-10-2002, 10:28 AM
Yeah it is possible but you will need to do some custom work to make them fit and look right. What is wrong with the stock SiR headlights anyway?
tbk49
10-10-2002, 02:57 PM
i think hes just talking about having a jdm bumper with stock lights, yea its easy to do just dont get the whole conversion, just the front bumper
91zc
10-10-2002, 03:12 PM
You are going need the whole conversion for the bumper to fit correctly.;)
QuickSilverEF9
10-10-2002, 03:25 PM
No actually you do not need the whole conversion for it to fit properly..
Worshp
10-10-2002, 03:38 PM
Stock headlights are narrower than SiR headlights. Most of the aftermarket projectors etc are the same width as USDM CRX's, so you will have a big gap where the inner corner of the headlight meets the bumper.
Not too sure about Civics, but for the CRX, this is definitely true..i've done the conversion.
Not too sure about Civics, but for the CRX, this is definitely true..i've done the conversion.
QuickSilverEF9
10-10-2002, 03:40 PM
Its the other way around... SiR headlights are narrower than USDM headlights... They projectors would look oversized...
91zc
10-10-2002, 04:13 PM
I was always under the impression that you needed the entire conversion for it to look right...Does the bumper just bolt on and look fine??? If so why does everyone by the entire conversion??
QuickSilverEF9
10-10-2002, 05:16 PM
I doesn't look good but you dont need the whole conversion as you stated.
EF9JDM
10-10-2002, 06:24 PM
you would have a gap on the hoods center part if you use USDM lights on a JDM hood
the bumper if you dont get the hole thing you will have a big gap in betwen the filler plate and bumper and it will look like your bumper sticks out hella far cuz the JDM front is 1" longer then USDM front
the bumper if you dont get the hole thing you will have a big gap in betwen the filler plate and bumper and it will look like your bumper sticks out hella far cuz the JDM front is 1" longer then USDM front
Worshp
10-10-2002, 06:27 PM
Originally posted by QuickSilverEF9
Its the other way around... SiR headlights are narrower than USDM headlights... They projectors would look oversized...
Wider....as in they come in to the centre of the bonnet more...not taller.
:)
Its the other way around... SiR headlights are narrower than USDM headlights... They projectors would look oversized...
Wider....as in they come in to the centre of the bonnet more...not taller.
:)
Setanta
10-11-2002, 10:17 AM
Originally posted by Worshp
Wider....as in they come in to the centre of the bonnet more...not taller.
:)
Dejoux is correct:
http://home.iprimus.com.au/cuchulainn/civic/civic-front.jpg
Wider....as in they come in to the centre of the bonnet more...not taller.
:)
Dejoux is correct:
http://home.iprimus.com.au/cuchulainn/civic/civic-front.jpg
Worshp
10-12-2002, 11:34 PM
[QUOTE]Originally posted by Setanta
Dejoux is correct:
Who is Dejoux? Well I know who he is but what does he have to do with this thread??:confused:
Dejoux is correct:
Who is Dejoux? Well I know who he is but what does he have to do with this thread??:confused:
QuickSilverEF9
10-12-2002, 11:37 PM
Yeah i meant up and down not the actually width horizontally... I guess I should be more specific next time.
Automotive Network, Inc., Copyright ©2025