front end parts

ok anyone know where I can get a kit that has everything for the front end rbuild on a 2000 cherokee, tie rods, sway, etc.... Thanks

Don't know about a kit...but I would only replace parts as needed.

Some of the parts are quite expensive, so it think a whole rebuild including ball joints and U-joints are going to cost a lot of buckers...

Start with a new steering stablilizer and a front end lube..

what problems are you having to want to rebuild the whole front end...?

shaking above 50mph I already replaced the stablizer and new tires are balenced and aligned I am down to te tie rods next I reckon

www.quadratec.com
Take a look

shaking above 50mph I already replaced the stablizer and new tires are balenced and aligned I am down to te tie rods next I reckon
OK. ..alignment? Did you do a lift?

Edit: sorry, you said you aligned... What kind of tires are you using?

ok anyone know where I can get a kit that has everything for the front end rbuild on a 2000 cherokee, tie rods, sway, etc.... Thanks


RockAuto.com

All the bushings, front end kits, etc. Excellent site with online catalog. I plan to use these guys when I R&R all the bushings on the front. Most of the suspension stuff is good, name-brand stuff; MOOG, Spicer or AC/Delco. They sell OEM and better replacement parts (not Hi-Po aftermarket stuff) and the prices are very good.

Good luck.

Mike
00XJ

shaking above 50mph I already replaced the stablizer and new tires are balenced and aligned I am down to te tie rods next I reckon
What about the ball joints? Lube ball joints and tie rod ends and see if that makes a difference. Add a touch of toe-in (1/32 to 1/16 in.) and see what happens.

Have you checked the trac-bar...especially the upper end?