Some more food for thought...

As i said in a previous post, im doing a swap...im not one to talk and not do...and so now im going to prove it...

The car....(my old ka-t car...) notice how low its sitting :) thanks to megan racing coilovers and one collar removed :D...
http://i35.photobucket.com/albums/d190/driftking777/2JZ%20projekt/2JZprojek-6.jpg

and the motor...
http://i35.photobucket.com/albums/d190/driftking777/2JZ%20projekt/2JZprojek-2.jpg
http://i35.photobucket.com/albums/d190/driftking777/2JZ%20projekt/2JZprojek-1.jpg
http://i35.photobucket.com/albums/d190/driftking777/2JZ%20projekt/2JZprojek-3.jpg
http://i35.photobucket.com/albums/d190/driftking777/2JZ%20projekt/2JZprojek-5.jpg

and the R154 tranny...have a ACT 6 puck clutch coming for it...:licka:
http://i35.photobucket.com/albums/d190/driftking777/2JZ%20projekt/2JZprojek-4.jpg

hopefully within the next few months of getting this clutch motor combo broke into the car, i plan on doing a single setup witha gt35r :D

btw...i can only fit 3 fingers under the front bumper :D

ballin! lol

how much???

look at that pose in the mirror, peeeiiimmmpp!!!!!!! :grinyes: :pimp:
http://i35.photobucket.com/albums/d190/driftking777/2JZ%20projekt/2JZprojek-1.jpg

:eek2:

Your quite mad.

theres an adapter kit out for an R154 onto a G54 block, me likey :grinyes:

Awesome to see its going somewhere, good luck with it!

look at that pose in the mirror, peeeiiimmmpp!!!!!!! :grinyes: :pimp:
http://i35.photobucket.com/albums/d190/driftking777/2JZ%20projekt/2JZprojek-1.jpg

i kinda look like the captain (captain morgan that is :D)

and its expensive...thats about all i'll say.

Gotta pay to play.


Found a pic that I thought was appropriate.

http://img410.imageshack.us/img410/1848/2jzayt0.jpg

haha

nice nice.

lmao

:eek2:

:1:

lol at all those posts..

thats crazy shit man. i vote you for the guymostlikelytotrycrazyswaps award.
i used an act six puck in my coupe. wierd to get used to, but amazing feel. so much fun slamming through gears too :grinyes:

good luck dude keep us updated

so the rb wasnt good enuff for you.... showoff.. lol good luck 2jz is a beast

update...

got the new crossmember in the car. got the motor all cleaned up, engine bay all cleaned up, put the new ACT 6 puck clutch on the motor...


...go to find out RNDfactory didnt send me the fucking clutch fork or the clutch solenoid....so finally the bolts and fork came in yesterday....

...however im ordering a new solenoid from Toyota on RND's bill...thank god there covering that.

THEN...when i thought everything was all fine and dandy...

i go to put the shifter extension on the tranny, i put it on, and i only got 2 gears? Im like WTF? 3rd and 4th. thats it.

...so after a day of fucking with it, i say im done with it for the day.

next day i come out and say hey let see if i can get teh stock setup to work...put it on, tranny works great all 5 gears and reverse is there again. so i inspect the extension that Tech2 sent me...its 1/6th" to short. so the shifter was rubbing on the housing not allowing me to actuate the other gears. so i had to send that back.

however brighter days are hopefully coming as my wiring harness and the new shifter extension should be hear as of this coming week...so hopefully i can have the motor in and running next week...we shall see..

I'll post pics of the swap then...

~Nick

however i will admit that the two companies that im dealing with are very helpful in solving my problems...its just the incoviences that suck...

~Nick

what ch doin with the old motor

its in the prescription seven

Meh, I wouldn't dick with that in an S13.

I think the S14s would be better suited since they naturally plow less, S13s need all the help you can get.

but whatever.

^^^understandable...however this is mostly going to be a drag/daily

my rx7 will be my drift/autox car...

thats gonna be a beast.
my roomate has an extra 2jzge from swapping a 1jz into his 92 sc300.
if you need any parts, PM me and im sure he could hook it up somewhat cheap.
good luck

once again a crazy swap. when that RWD integra is done there wont be much left for you.

make sure you take lots of pictures, and tell me how you are doing all of this because i plan on doing this very soon too.
where did you get the crossmember at? 2jzswap.com?
-tim

make sure you take lots of pictures, and tell me how you are doing all of this because i plan on doing this very soon too.
where did you get the crossmember at? 2jzswap.com?
-tim

Correct, i could have done it at the shop, however we would have to wait before we could work on it, as we have ALOT of buggies to be pumping out right now...

...and never fear i'll take pics once the motor starts going in.

~Nick