Help w/ Programing keyless Entry
kramnella
03-13-2007, 04:20 PM
I have a 1999 Grand Prix GT and have purchased a new keyless entry pendant. I have the programming insrtuctions and they fail to work. When I go thru the procedure and get to the point of turning the key from accessory to off and back to accessary quickly this is what I get:
2 chimes, a pause, 3 chimes, a pause, 6 chimes, a pause, 8 chimes
this repeats itself 3 times then stops and when I hold the lock and unlock buttons down for 14 seconds nothing happens.
Does anyone know what is happening here? Some advice would be very helpfull.
2 chimes, a pause, 3 chimes, a pause, 6 chimes, a pause, 8 chimes
this repeats itself 3 times then stops and when I hold the lock and unlock buttons down for 14 seconds nothing happens.
Does anyone know what is happening here? Some advice would be very helpfull.
Onblsht
03-13-2007, 05:20 PM
Do you have the correct remote?
FCC: ABO0204T
Part # 10246215
FCC: ABO0204T
Part # 10246215
kramnella
03-14-2007, 04:12 AM
Yes I do, in fact it is new purchased from the Pontiac dealership
kramnella
03-14-2007, 02:03 PM
Yes I have the correct remote, and it's new
richtazz
03-14-2007, 03:33 PM
After you turn the key acc/off/acc, are you also opening then closing a door before the chimes start? As far as the chimes go, the first two flashes are indicating the type of BCM you have (type 2) and the programming mode you're in (mode 3). These two should be explained in your owners manual. The second two flashes I believe are trouble code(s), and I'm still working on deciphering it for you.
abesafab
04-08-2007, 11:42 PM
My son and I just performed the programming for his remote tonight using these instructions. The first set seemed to work the best. Nothing worked though until he found and replaced a blown fuse in the fuse panel under the hood. It also affected his radio. Good luck.
***Edited by Moderator***
***Edited by Moderator***
BNaylor
04-09-2007, 12:03 AM
My son and I just performed the programming for his remote tonight using these instructions. The first set seemed to work the best. Nothing worked though until he found and replaced a blown fuse in the fuse panel under the hood. It also affected his radio. Good luck.
***Edited by Moderator***
abesafab,
Please take note that we do not allow posting of GM copyrighted material, therefore your post has been edited to exclude that material.
What we may allow is a recital of material or a FSM/TSB procedure in your own words but the information you posted verbatim clearly appears to be copyrighted GM FSM and/or TSB information obvious by the GM copyright notice contained at the bottom of each document.
***Edited by Moderator***
abesafab,
Please take note that we do not allow posting of GM copyrighted material, therefore your post has been edited to exclude that material.
What we may allow is a recital of material or a FSM/TSB procedure in your own words but the information you posted verbatim clearly appears to be copyrighted GM FSM and/or TSB information obvious by the GM copyright notice contained at the bottom of each document.
Automotive Network, Inc., Copyright ©2025