Question about tcc solenoid

I have a 1989 Cutlass Calais Sl 2.3l quad 4. I recently unplugged the tcc solenoid to solve a stalling problem. I now have a service light come on in the car. code-26. I can clear the code by pulling the fuse and as soon as I take off in drive it comes back. I know that code 26 is a quad driver code and it could mean a few things, but should the car show a fault by unhooking the tcc and if so how do you work around it? I never had the code before I unhooked the tcc and it was a pain in the ass to get unplugged so I haven't verified by plugging back in.

Welcome ot AF.

The quad driver is just what they call a hub wire junction.
So you unpluged wires in the system, that is why the DTC is thrown.

Here is a link that shows you the ifs and hows of the TCC.
http://autorepair.about.com/cs/doityourself/l/aa011703b.htm (http://autorepair.about.com/cs/doityourself/l/aa011703b.htm)

Hope that helps.

Xeroinfinity thank you for the reply. I was curious if you knew how to clear the service code and make it go away for ever and ever without replacing the solenoid.

You cant. Just replace the tcc. its not that bad.