Our Community is over 1 Million Strong. Join Us.

Grand Future Air Dried Beef Dog Food
Air Dried Dog Food | Real Beef

Grain-Free, Zero Fillers


Need help with o2 sensor


gn6987
03-06-2007, 06:02 PM
Hi I have a 2003 gts eclipse and my check engine light come on i have a scanner and it reads p0141. I cleared it and it comes back on after I turn it off and back on. If i do not turn it off the check engine does not come on. I checked the wiring and made sure everything was connected and it is. Can some one help

Blackcrow64
03-06-2007, 11:23 PM
Have you considered that maybe the o2 sensor is actually bad and needs to be replaced? Any other clues that point towards it being bad? Lack of power, bad fuel economy, etc...

Sleepr awd
03-06-2007, 11:24 PM
so you need to replace the o2 sensor? it's not hard. get a o2 sensor socket, some pb blaster, and maybe a torch if it gets too bad, and have at.

easy as pie

gn6987
03-09-2007, 12:04 AM
I replaced the o2 sensor and erased the check engine light but it still come back i dont know what to do next???

Blackcrow64
03-09-2007, 01:26 AM
Are you sure that the CEL isn't giving you a code for something else now?

gn6987
03-09-2007, 08:58 PM
No the code is still p0141

Blackcrow64
03-09-2007, 09:01 PM
You check all the wiring to it and such to make sure its not shorted out?

WpBoosted3g
03-26-2007, 03:31 PM
the o2 sensors has 4 wires inside the one wire.. you know this right?

also. did you mix up the 2 black wires?

have you ever extended the o2 sensor wires?

Add your comment to this topic!


Quality Real Meat Nutrition for Dogs: Best Air Dried Dog Food | Real Beef Dog Food | Best Beef Dog Food