convertable top RELAY PROBLEMS

my convertable top RELAY wont move the top up and down

i see power going to the relay for the motor
but i dont see power coming out of the relay

i bough 3 new relays but they all do the same thing

does anyone have any suggestions

i used a test light to check both sides of this relay that switches polarity to move the electric top motor up and down

the power is coming in but its not going out the the conv top motor

Power goes in, none comes out, new part didnt fix it...got me stumped. Is there an inline fuse or anything? Is the motor grounded?

Power goes in, none comes out, new part didnt fix it...got me stumped. Is there an inline fuse or anything? Is the motor grounded?


i could not find a fuse i was looking
the motor is not grounded its sitting on rubber bolts

i was able to run wires directly from the relay wiring to the pump and moving the top up and down. when i put the relay on it doesnt work

i have 3 brand new relays
im stumped too

i grounded the negative when i used the power from the relay harness to manually power the top without the relay