Need help finding EST wire 91 Caprice
-9c1
02-17-2007, 01:55 PM
I've been trying to find the Electric Spark Timing wire for my 91 Caprice but haven't had any luck. I did run across a wire connecting to block on the passanger side. It's in the very back. I'm working on getting it out right now and i'm doing it out of sheer hope that it's the cable. If anyone can help me i'd be most apreciated. 1991 Chevrolet Caprice 9c1 VIN 7. Thanks!
CD Smalley
02-17-2007, 02:08 PM
Look on the passenger side fender well. Brown wire with a black stripe I believe. Should have a GM weatherpack connector that you can disconnect.
-9c1
02-17-2007, 02:28 PM
Look on the passenger side fender well. Brown wire with a black stripe I believe. Should have a GM weatherpack connector that you can disconnect.
Would this wire be isolated or would it be part of an existing wire bundle? My friends got a 3rd gen Camaro and the est wires isolated on the passanger wheel well. I can't for the life of me find it :(
Would this wire be isolated or would it be part of an existing wire bundle? My friends got a 3rd gen Camaro and the est wires isolated on the passanger wheel well. I can't for the life of me find it :(
-9c1
02-17-2007, 05:25 PM
Ok I figured it out. I couldn't find the EST plug so what I did was cut the EST from the connector going to the Ignition Control Module. I didn't take a pic but if anyone in the future is having problems finding the EST on their Caprices i'd strongly recommend doing it the way I did.
http://i21.photobucket.com/albums/b251/VerbalVenom/Alldata/41888240.gif
I cut wire B on the distributor 4 terminal connector (shown on top right for set timing). From there I basically made my own connector to replace the one i couldn't find.
http://i21.photobucket.com/albums/b251/VerbalVenom/Alldata/41888240.gif
I cut wire B on the distributor 4 terminal connector (shown on top right for set timing). From there I basically made my own connector to replace the one i couldn't find.
463
02-17-2007, 05:42 PM
did you want to set the timing on the eng?
-9c1
02-17-2007, 07:31 PM
did you want to set the timing on the eng?
Yea I set base timing today. It's running great right now. I couldn't be any happier. It was at 4* retard and it was running like shit. I was able to disconnect the est, put down the base timing and "re teach" the PCM.
Yea I set base timing today. It's running great right now. I couldn't be any happier. It was at 4* retard and it was running like shit. I was able to disconnect the est, put down the base timing and "re teach" the PCM.
Automotive Network, Inc., Copyright ©2026
