Exhaust Out The Passenger Side
cyberfelon
10-02-2002, 01:18 PM
OK, im lookin under my car, and i see no way to ahve the muffler on the passenger side. I HATE THOSE 90 degree bends but i dont know how i could fit it on the passenger side. The sway bar is in the way. ANY suggestions would be greatly appreciated.
dfarres
10-02-2002, 01:24 PM
ive seen a lot of people put them on the the pass. side & cut out a notch like the other side.
EF9JDM
10-02-2002, 02:52 PM
My exhaust comes out the pass side i havea 5zigen half back with a custom braket to keep it up off the ground a little more then stock
http://www.geocities.com/ef9_jdm/exhaust.jpg
http://www.geocities.com/ef9_jdm/exhaust.jpg
Tony
10-02-2002, 03:44 PM
Originally posted by EF9JDM
My exhaust comes out the pass side i havea 5zigen half back with a custom braket to keep it up off the ground a little more then stock
http://www.geocities.com/ef9_jdm/exhaust.jpg
What does it sound like? that is what I was thinking about getting.
My exhaust comes out the pass side i havea 5zigen half back with a custom braket to keep it up off the ground a little more then stock
http://www.geocities.com/ef9_jdm/exhaust.jpg
What does it sound like? that is what I was thinking about getting.
Melt
10-02-2002, 04:34 PM
I saw a sedan with it out the passenger side the other day.
What you should do to make it look professional is measure the dimensions of the stock notch on the left side, cut out a notch JUST LIKE IT on the right, then put the piece you cut out of the right side into the left side and sand it down so it looks like the exaust was supposed to come out the pass side.
Note: This post should not be considered whoring due to the fact that it contained some useful information and a good idea
What you should do to make it look professional is measure the dimensions of the stock notch on the left side, cut out a notch JUST LIKE IT on the right, then put the piece you cut out of the right side into the left side and sand it down so it looks like the exaust was supposed to come out the pass side.
Note: This post should not be considered whoring due to the fact that it contained some useful information and a good idea
GTA
10-02-2002, 05:20 PM
Originally posted by Melt
Note: This post should not be considered whoring due to the fact that it contained some useful information and a good idea
you dont gotta put this on every post Melt, we can tell that its something useful and not whoring ;)
Note: This post should not be considered whoring due to the fact that it contained some useful information and a good idea
you dont gotta put this on every post Melt, we can tell that its something useful and not whoring ;)
dfarres
10-02-2002, 06:12 PM
Originally posted by Melt
Note: This post should not be considered whoring due to the fact that it contained some useful information and a good idea
hahahahahahaha......this is me crackin up :lol2:
Note: This post should not be considered whoring due to the fact that it contained some useful information and a good idea
hahahahahahaha......this is me crackin up :lol2:
mightytexn
10-02-2002, 08:21 PM
Originally posted by Melt
What you should do to make it look professional is measure the dimensions of the stock notch on the left side, cut out a notch JUST LIKE IT on the right, then put the piece you cut out of the right side into the left side and sand it down so it looks like the exaust was supposed to come out the pass side.
I agree. I think it looks retarded when people have 2 holes for exhaust in their bumper and only one is used.
What you should do to make it look professional is measure the dimensions of the stock notch on the left side, cut out a notch JUST LIKE IT on the right, then put the piece you cut out of the right side into the left side and sand it down so it looks like the exaust was supposed to come out the pass side.
I agree. I think it looks retarded when people have 2 holes for exhaust in their bumper and only one is used.
kris
10-02-2002, 08:23 PM
Originally posted by mightytexn
I agree. I think it looks retarded when people have 2 holes for exhaust in their bumper and only one is used.
The hole in the bumper is the only reason I wont do this. Wings West needs to learn to not put that huge cutout in.
I agree. I think it looks retarded when people have 2 holes for exhaust in their bumper and only one is used.
The hole in the bumper is the only reason I wont do this. Wings West needs to learn to not put that huge cutout in.
turbcivic
10-03-2002, 04:02 PM
:( :( :(
That is how may car is
That is how may car is
Melt
10-03-2002, 04:25 PM
Originally posted by turbcivic
:( :( :(
That is how may car is
I said fuck it and we did custom piping to get it to come out the left
:( :( :(
That is how may car is
I said fuck it and we did custom piping to get it to come out the left
dx_tuner
10-03-2002, 07:19 PM
Well I'm gonna be making my own exhaust system in my Auto Tech class cause we just got that pipe bender machine. And I'm gonna try to make it as straight as possible using 2.25 inch pipe coming out the drivers side. I'm usesing a Janspeed universal muffler, kinda looks like the Skunk2 but with a straight tip. I'll take pics of it when I get started on it. And if it works out great maybe I'll make a couple of them and see how much I can sell them for:D
cyberfelon
10-03-2002, 07:21 PM
aight thanks guys. ill see what i can do
Automotive Network, Inc., Copyright ©2026