88.5 AC bypass
chadstambaugh
10-01-2002, 09:24 AM
I have a 1988.5 Ford Escort GT and I don't want to spend 350.00 on a new AC compressor. I just want to put a new belt on it to bypass this compressor. Anyone ever do this? What size is the belt? Any ideas please let me know.
Thanks,
Chad
[email protected]
Thanks,
Chad
[email protected]
fordman123
10-02-2002, 08:37 PM
I don't know on the belt size, but here's a tip from old days:
Take a piece of string and wrap around pulleys as they would if it were a belt, bypassing the ac compressor. Mark the place where they meet and subtract about an inch. I have done this several times, although sometimes it is hard for the parts guy to go by size rather than vehicle application. Another thing is ask for a belt, and state that it doesn't have air conditioning, they may hand you the correct belt, and if it's not,
carry it back for a refund.
Just a thought.
Good luck
Fordman
Take a piece of string and wrap around pulleys as they would if it were a belt, bypassing the ac compressor. Mark the place where they meet and subtract about an inch. I have done this several times, although sometimes it is hard for the parts guy to go by size rather than vehicle application. Another thing is ask for a belt, and state that it doesn't have air conditioning, they may hand you the correct belt, and if it's not,
carry it back for a refund.
Just a thought.
Good luck
Fordman
chadstambaugh
10-02-2002, 10:06 PM
I know the string trick.. I was thinking somone could save me the time and tell me the size. O Well.
Thanks,
Chad
Thanks,
Chad
Automotive Network, Inc., Copyright ©2026
