safc2 installation

i just got my safc2 from a member in here, and i have it in my car now, i followed the directions on vfaq, and the intructions tell you to use the yellow and white wire. But i checked tuners and found another site that says to use the pink one and orange, so now i'm like WTF!!! which one do i trust ? I have it installed using the white and yellow but i'm just wondering, Which one is the right one?

here is the link to what i used http://www.vfaq.com/index-main.html

here is the link to the site that tells you to use pink and orange http://my.prostreetonline.com/t105.htm

Also, where do i go to the menu for the corrections? i have 510cc injectors. and i just wanna get it to idle right and drive so i can take it to the dyno.($75/hr with them doing the tunning)

I would trust vfaq over some other website being as it was written by DSMers. And if it doesn't work, you can always switch it.

I would trust vfaq over some other website being as it was written by DSMers. And if it doesn't work, you can always switch it.
now i just found this http://www.vfaq.com/index-main.html on vfaq and it says to use the pink and orange, and i also noticed that my hz is not changing, it stays on 3 all the time, so i'll try swithcing when is not too cold.