obd0-1 ecu wiring and ????? need help

alright i just bought a p28 obd 1 ecu chipped with hondata and i got the wiring harnesses directions and it says i need an obd 1 or 2 distributor with this and something about an o2 sensor????????????? can i run on my obd 0 stuff or do i have to swap these parts out.????/any one that can help i would be greatly appreciated. thanks.

You need those parts, just like the instructions say you do.

You need those parts, just like the instructions say you do.


:banghead: :grinyes: :banghead: :grinyes: :banghead: :grinyes: :banghead: :grinyes:

Gotta have everything together for it to work.

www.Rywire.com

Yup, get yourself an obd-1 dizzy and o2 sensor if you have a P28.

i already got the harness so do i need a second o2 sensor or just the four wire 02 sensor and the distibutor then. alright think i got it thanks guys.

i would recommend a kingdistributor td-44u (if this is a b-series engine). and a 4 wire o2 sensor. if your header doesn't havea hole for the o2 sensor before the cat you will need to make one there. if you need more help with the wiring of the distributor i can get it for you.

i did this to my crx and it is very clean.