Fully built b20-vtec engine. 550whp! FS.
kpeters0929
01-28-2007, 04:15 AM
Selling my fully built b20-v motor. Motor made 549 whp 343 torque at 24psi while peeling out on 4th on the dyno.
Bottom end
'00 b20z2 usdm block
RS machine sleeved 84.5mm
Micropolished Honda crank, all new Honda main/rod bearings, honda thrust washers
Crower 4340 steel Billet rods
JE 9:1 pistons
Block was also hot tanked, and main journals were align honed.
Exedy twin disc clutch for 92+ b-series
head
92 Jdm b16a head
Intake ports were mildly port/polished by DH-racing as well as 5 angle valve job
Ferrea stainless valves
all new Oem honda valve seals
supertech springs/retainers
Cometic head gasket
Golden eagle head studs
Edelbrock victorX manifold
Mr. Gasket fuel rail
68mm billet throttle body
Type r Camshafts with Hayame cam gears.
Motor was built by Mike at Extreme parts in august. Car was tuned on S300 Hondata by Dave at Whipfactory. Motor has less then 3000miles on it. I have all receipts for the motor etc.etc. Motor does not smoke, it has 185compression across the board. Great oil pressure. Only reason i'm selling it is because i wanna do something different in my crx for next year *hint k-series. ;) This engine is basically bullet proof (with the right tuning of course) Price is $4500 with twin disc or $3800 without! What a steal! Motor costed me $10,000+ if your planning on going all out for next year this will save you a lot of $. I did have pictures of the motor getting assembled etc. but i lost them when my computer crashed :crook: pm me if interested or if you would like to check it out in person. Located in Milwaukee, WI.
http://i43.photobucket.com/albums/e384/theinfamouskonrad/DSC00547.jpg?t=1166835541
http://i43.photobucket.com/albums/e384/theinfamouskonrad/sleevedblock.jpg?t=1169357648
http://i43.photobucket.com/albums/e384/theinfamouskonrad/sleevedblock1.jpg?t=1169357701
http://i43.photobucket.com/albums/e384/theinfamouskonrad/DSC00587.jpg?t=1166835613
http://i43.photobucket.com/albums/e384/theinfamouskonrad/DSC00573.jpg?t=1166835637
http://i43.photobucket.com/albums/e384/theinfamouskonrad/DSC00646.jpg?t=1167515604
http://i43.photobucket.com/albums/e384/theinfamouskonrad/DSC00643.jpg?t=1167515641
http://shutter11.pictures.aol.com/data/pictures/01/003/75/CB/47/19/hKL8Xicgl8aZX1f1ap+skmZWJi0j49H30300.jpg
http://shutter12.pictures.aol.com/data/pictures/01/005/55/6B/EB/B3/gzL7m4KCTKxVO7lCR5YbE8kGZ2+5Zabk0300.jpg
Bottom end
'00 b20z2 usdm block
RS machine sleeved 84.5mm
Micropolished Honda crank, all new Honda main/rod bearings, honda thrust washers
Crower 4340 steel Billet rods
JE 9:1 pistons
Block was also hot tanked, and main journals were align honed.
Exedy twin disc clutch for 92+ b-series
head
92 Jdm b16a head
Intake ports were mildly port/polished by DH-racing as well as 5 angle valve job
Ferrea stainless valves
all new Oem honda valve seals
supertech springs/retainers
Cometic head gasket
Golden eagle head studs
Edelbrock victorX manifold
Mr. Gasket fuel rail
68mm billet throttle body
Type r Camshafts with Hayame cam gears.
Motor was built by Mike at Extreme parts in august. Car was tuned on S300 Hondata by Dave at Whipfactory. Motor has less then 3000miles on it. I have all receipts for the motor etc.etc. Motor does not smoke, it has 185compression across the board. Great oil pressure. Only reason i'm selling it is because i wanna do something different in my crx for next year *hint k-series. ;) This engine is basically bullet proof (with the right tuning of course) Price is $4500 with twin disc or $3800 without! What a steal! Motor costed me $10,000+ if your planning on going all out for next year this will save you a lot of $. I did have pictures of the motor getting assembled etc. but i lost them when my computer crashed :crook: pm me if interested or if you would like to check it out in person. Located in Milwaukee, WI.
http://i43.photobucket.com/albums/e384/theinfamouskonrad/DSC00547.jpg?t=1166835541
http://i43.photobucket.com/albums/e384/theinfamouskonrad/sleevedblock.jpg?t=1169357648
http://i43.photobucket.com/albums/e384/theinfamouskonrad/sleevedblock1.jpg?t=1169357701
http://i43.photobucket.com/albums/e384/theinfamouskonrad/DSC00587.jpg?t=1166835613
http://i43.photobucket.com/albums/e384/theinfamouskonrad/DSC00573.jpg?t=1166835637
http://i43.photobucket.com/albums/e384/theinfamouskonrad/DSC00646.jpg?t=1167515604
http://i43.photobucket.com/albums/e384/theinfamouskonrad/DSC00643.jpg?t=1167515641
http://shutter11.pictures.aol.com/data/pictures/01/003/75/CB/47/19/hKL8Xicgl8aZX1f1ap+skmZWJi0j49H30300.jpg
http://shutter12.pictures.aol.com/data/pictures/01/005/55/6B/EB/B3/gzL7m4KCTKxVO7lCR5YbE8kGZ2+5Zabk0300.jpg
Automotive Network, Inc., Copyright ©2026