Antifreeze question
uH8THECHEVY
01-25-2007, 10:30 PM
I have a 1994 Lumina witha 3.1L engine. I recently changed the thermostat and the upper radiator hose. Since then i have noticed that the antifreeze in the radiator don't get hot but the hose that I changed is hot.
Is there blockage somewhere?
Thanks in advance for any help.
Is there blockage somewhere?
Thanks in advance for any help.
richtazz
01-26-2007, 10:59 AM
If you didn't bleed the air out of the cooling system after changing the t-stat, it's possible that there is air trapped in the engine which isn't allowing proper coolant circulation.
hondahawkster
06-21-2009, 08:13 PM
I had the same problem . there was a bleeder valve that I had to open to let the air out ...
jeffcoslacker
06-24-2009, 12:51 AM
Ditto. You're airlocked. Open the bleeders and fill w/engine off, run to operating temp, let cool for 15 minutes or so, open bleeders and fill, repeat until you get no air when you open them.
Automotive Network, Inc., Copyright ©2026
